User Manual
Table Of Contents
- A Few Words of Thanks
- Chapter 1: Getting Started
- Rear Panel Connections
- Setting Up the Pro 3
- Using the Main Display
- Sound Banks
- Editing Programs
- Saving a Program
- Using Paraphonic Mode
- Exploring the Pro 3 in Greater Depth
- Chapter 2: Pro 3 Controls
- Oscillators
- Mixer
- Filters
- Amplifier Envelope
- Auxiliary Envelopes
- Low Frequency Oscillators
- Modulation
- Effects
- Arpeggiator
- Sequencer
- Normal, Gated, and Trigger Modes
- Programming the Sequencer
- Recording Phrases/Sequences A,B,C, or D.
- Sequencing Parameter Changes in Real-Time
- Copying a Sequence from One Track to Another
- Copying and Pasting an Entire Sequence
- Muting a Sequence Track
- Creating An Extended Sequence
- Paraphonic Sequencing
- Adding Rests, Ties, and Velocity
- Editing Duration
- Adding Ratcheting
- Editing Other Elements of a Sequence
- Setting or Changing the Destination of a Track
- Recording Additional Sequencer Tracks for Modulation
- Using Slew
- Turning off the Sequencer’s “Notes” Track
- Sequencer Parameters (Front Panel)
- Additional Sequencer Parameters (Display Menus)
- Cue Program
- Tuned Feedback
- Master Volume/Program Volume
- Transpose
- Hold
- Glide
- Pitch and Mod Wheels
- Touch slider
- Adding Aftertouch
- Distortion
- Play List
- Miscellaneous Parameters
- Global Settings
- Chapter 3: Programming the Pro 3
- Synthesis 101: Synth Bass
- Creating Synth Brass
- Creating a Hard-Sync Lead
- Chapter 4: Using the Pro 3 with External Devices
- Appendix A: Modulation Sources
- Appendix B: Modulation Destinations
- Appendix C: Troubleshooting and Support
- Appendix D: Calibrating the Pro 3
- Appendix E: Alternative Tunings
- Appendix F: MIDI Implementation
- Bookmark 1
- Bookmark 1
145
Pro 3 User’s Guide
Appendix F: MIDI Implementation
NRPN Range Description
4096 0-24
Master Fine Tune
4097 0-100
Master Coarse Tune
4098 0-16
MIDI Channel
0 = All
4099 0-3
MIDI Clock Mode
0 = Off
1 = Master
2 = Slave
3 = Slave Thru
4100 0-1
MIDI Clock Cable In
0 = MIDI Port
1 = USB
4101 0-4
MIDI Clock Cable Out
0 = MIDI 1 Port
1 = MIDI 2 Port
2 = USB
3 = MIDI All
4 = All
4102 0-2
MIDI Param Send*
0 = NRPN
1 = CC
2= Off
4103 0-2
MIDI Param Receive†
0 = NRPN
1 = CC
2= Off
4104 0-1
MIDI Control Enable
0 = Off
1 = On
4105 0-1
MIDI SysEx Cable
0 = MIDI
1 = USB
4106 0-2
MIDI Out Select
0 = Off
1 = MIDI
2 = USB
3 = MIDI+USB
4107 0-1
MIDI SysEx Enable
0 = Off
1 = On
4108 0-1
Local Control*
0 = Off
1 = On
4109 0-1
Mono/Stereo
Mono/Stereo
0 = Stereo
1 = Mono
4110 0-2
Pot Mode
0 = Relative
1= PassThru
2 = Jump
NRPN Range Description
4111 0-3
Seq Pedal Mode
0 = normal
1= trigger
2= gate
3= trigger+gate
4112 0-1
MIDI Arp Notes
0 = Off
1 = On
4113 0-7
Velocity Curve
4114 0-3
Pressure Curve
4115 0-64
Scale (Alt Tunings)
4116 0-1
MIDI Program Send
0 = Off
1 = On
4117 0-1
MIDI Program Receive
0 = Off
1 = On
4118 0-1
Screen Saver
0 = Off
1 = On
4119 0-4
Pedal 1 Assign
4120 0-1
Pedal 1 Polarity
0 = normally open
1= normally closed
4121 0-1
Sustain Pedal Polarity
0 = Off
1 = On
4122 0-4
Sustain Pedal Mode
4123 0-1
Pressure Enable
0 = Off
1 = On
4124
0-1
Arp Sync
0 = Off
1 = On
4125 0-255
CV1 In Scale
4126 0-255
CV1 In Scale
4127 0-255
CV3 In Scale
4128 0-255
CV4 In Scale
Global Parameter Data
The table shows the global data sent and received on global parameter
dumps, and corresponding NRPN number when sent/received individually.