User Manual

OB-6 Operation Manual

Sequencer

Use the bpm, value, or tap tempo controls to adjust sequencer playback speed.

To transpose a sequence:

1. Press play. The sequence begins playback.

2. Press and hold record and press a key on the keyboard. “Middle C”

is the reference point. Playing a note above middle C transposes the

sequence higher by that interval. Playing a note below middle C trans-

poses the sequence lower by that interval.

Sequencer Parameters

Here are the controls and parameters used when interacting with the sequencer.

Record: On, Off—This switch turns sequencer recording on and off.

Play: On, Off—This switch turns sequencer playback on and off.

BPM: 30…250—Sets the tempo for the Sequencer and Arpeggiator in BPM

(beats per minute). The

tap tempo LED ashes at the BPM rate. When lfo

sync is turned on, the BPM rate affects the LFO frequency. When syncing to

an external MIDI clock source, the BPM setting has no effect.

Tap Tempo: 30…250—Tap this button at least 4 times to quickly set the

tempo for the Sequencer and Arpeggiator. The LED ashes at the BPM

rate you set.