User Manual
33
OB-6 Operation Manual
Distortion
HAL: This is a Hall reverb. It’s the largest of the available reverbs. Adjust-
able parameters are reverb time and early reection amount.
rOO: This is a Room reverb. It’s the second largest of the available reverbs.
Adjustable parameters are reverb time and early reection amount.
PLA: This is a Plate reverb. It emulates a classic reverb plate. Adjustable
parameters are reverb time and early reection amount.
SPr: This is a Spring reverb. It emulates a vintage, guitar-amp-style
reverb. Adjustable parameters are decay and tone.
Distortion
The OB-6 provides an analog distortion effect. This can be used to
add warmth, harmonic complexity, and an aggressive edge to sounds.
The character of the distortion is affected by the harmonic content of a
program. Sounds with more high-end will sound different than sounds
with fewer harmonics.
To add distortion:
1. Press and hold the effect button.
2. Turn the mix knob to set the distortion amount.
3. Release the
effect button.
EFFECTS
ON/OFF EFFECT TYPE
A B
MIX
Press and hold
for 1 second
Display changes
to “Dist”
Turn Mix knob
to set amount
Adding the Distortion effect