User Manual

6 Getting Started Dave Smith Instruments
Be careful when write is enabled. You can change banks and tens without
executing write, but once you press a program selector button (0-9) for the “ones”
digit, the
write command is executed and the program at that location is overwritten.
To save a program to a different bank location:
1. Press the write button. Its LED begins blinking.
2. Hold down the
bank button then press a program selector button to
specify the “hundreds” bank of the program. You can only save to
Banks 0-4.
3. Hold down the
tens button then press a program selector button (0-9)
to specify the “tens” digit of the program.
4. Press a program selector button (0-9) to specify the “ones” digit of the
program.
5. The write button LED stops blinking and the program is saved.
Canceling Save
Sometimes you may want to cancel saving a program before you
commit.
To cancel the Save process before you commit:
• If the write button LED is ashing, press it again. The LED stops ash-
ing and saving is canceled. You can return to editing if you want.