User Manual

2 Getting Started Dave Smith Instruments
Sound Banks
The OB-6 contains a total of 1000 programs. 500 are permanent and
500 can be overwritten. Banks 0-4 are User Banks that can be overwrit-
ten. Banks 5-9 are Factory Banks that are permanent. You can edit the
programs of either bank, but you can only save them to Banks 0-4. As
shipped from the factory, presets 000-499 are identical to 500-999.
10 2 3 4 5
6 7 8 9
SELECT
BANK
SELECT
TENSBANK PROGRAM
Local Ctrl Seq Jack Pot Mode Sustain +/- Alt Tuning
Vel Response AT Response Stereo/Mono Pgm Dump
TransposeIncrementDecrement Master Tune MIDI Channel MIDI Clock Clock Port
Param Xmit Param Rcv MIDI Control MIDI SysEx MIDI Out
Program bank, tens, and number selectors
Selecting Programs
Use the bank, tens, and program selector buttons to select and recall
programs.
To choose a program:
1. Press a program selector button (0-9) to specify the “ones” digit of the
program.
2. Hold down the tens button then press a program selector button (0-9)
to specify the “tens” digit of the program.
3. Hold down the bank button then press a program selector button (0-9)
to specify the “hundreds” bank of the program.
To choose program 123, for example:
1. Hold bank and press 1. Then release the bank button.
2. Hold tens and press 2. Then release the tens button.
3. Press program selector button 3.
Holding down the decrement button and pressing the increment button
advances the program number by 1 value. Conversely, holding down the increment
button and pressing the decrement button decrements the program number by 1 value.
This is especially useful for going between Tens, as you can wrap around to the next
set.