User Manual

55
Prophet-6 Operation Manual
Exporting Programs and Banks
HP Filter: Selects the High-Pass Filter cutoff frequency as a modulation
destination. With a positive amount setting, pressing the keys harder will
increase the high-pass cutoff frequency, reducing the low-end of a sound.
With a negative
amount setting, pressing the keys harder will decrease
the high-pass cutoff frequency allowing more low frequencies to pass.
Controlling the low-pass or high-pass lter frequency with Aftertouch may or
may not have an audible effect, depending on the cutoff frequency of the lter.
Exporting Programs and Banks
You can use the pgm dump command in the globals section to transmit the
current program, bank, or all banks in SysEx format via the selected
MIDI port. This allows you to save your programs so that you can share
them or archive them.
To export a program or bank as a SysEx le over MIDI:
1. Press the globals button once (this enables the upper set of parameters)
then press program selector 8 to select the midi sysex command.
2. Use the
bank/decrement and tens/increment buttons to select the
appropriate MIDI port — MIDI (MID) or USB (usb).
3. Press
globals a second time (this enables the lower set of parameters)
then press program selector 8 to select the pgm dump command. The
write button begins ashing.
4. Use the bank/decrement and tens/increment buttons to select the
desired option — program (PRO), tens (ten), bank (ban), user banks
(USR), all (all).
5. Press write. The program or bank is exported.
Dumped programs will load back into the same bank and program location in
memory when received by the Prophet-6 via MIDI.