User Manual

52 Misc Parameters Dave Smith Instruments
Misc Parameters
The misc parameters section allows you to access controls for a number
of essential functions described below. To set the key mode and p whl
range, hold down the associated button in the misc parameters section,
then use the
bank/decrement and ten/increment buttons to step through
available settings.
P WHL RANGEKEY MODE
PAN SPREAD
MISC PARAMETERS
PRGM VOL
The Misc Parameters controls
Pan Spread: Pans the audio in the stereo eld individually per voice. Set
to 0, all voices are panned to the center. As Pan Spread is turned up, the
audio in each voice is gradually moved away from the center by greater
amounts. Every other voice goes in a different direction, left or right.
This creates a broader stereo eld while playing.
Key Mode: Low Note (LO), High Note (Hi), Last Note (Las), Low
Note Retrigger (LOr), High Note Retrigger (Hir), Last Note Retrigger
(LAr)—Selects the key priority when more than one key is played
simultaneously in when in Unison mode. low note, high note and last
note are monophonic playback modes that give priority to the lowest,
highest, or last note played, as their names imply.
P Wheel Range: 0...12 Semitones— Selects the range in semitones
when moving the Pitch Wheel forward or backward. Twelve semitones
equals 1 octave.
Program Volume: Sets the volume of an individual program. This is
useful for matching volume between programs.
There is enough gain in the Prophet-6 that if you set some programs to a
high program volume, clipping distortion may occur. If this happens, try lowering the
program volume, the levels of the oscillators in the mixer, the VCA envelope amount, or
the resonance parameter of the low-pass or high-pass lter.