User's Manual

7 ST User Manual
Disarming the System
Disarming the system deactivates all armed zones except for 24-hour zones such as
smoke detectors. Regardless of which method you use to arm your system, the disarming
sequence is always the same.
Using an LCD Keypad:
Enter through a door programmed with an entry delay.
Press the DISARM key and enter a user PIN or simply enter a user PIN directly.
The system will disarm.
Using a Wireless Keyfob:
Press the DISARM button to disarm the system.
Two tones will emit from the interior sounders.
Wireless Keyfob Operation
Your system may include a wireless keyfob, which can be used to control the system as
follows:
To arm/disarm the system:
Press the ARM PERIM button to arm the system to the Arm Perimeter level.
Press the ARM ALL button to arm the system to the Arm All level.
Press the DISARM button to disarm the system.
To activate a panic alarm:
Press and hold the ARM ALL and ARM PERIMETER buttons
simultaneously for three seconds.
To turn lights on/off (optional modules must be installed):
Press the LIGHTS button.
1.
2.
3.
1.
2.
•
•
•
•
•
Note: All codes can be
used interchangeably. For
example, a system armed
with one user’s code can
be disarmed by another
user’s code.
Note: All codes can be
used interchangeably. For
example, a system armed
with one user’s code can
be disarmed by another
user’s code.
Note The system will
sound a short tone on the
interior sounders when
arming the system using
a keyfob (two tones will
sound when disarming).
Note The system will
sound a short tone on the
interior sounders when
arming the system using
a keyfob (two tones will
sound when disarming).