User's Manual

4 ST User Manual
Keypad Layout
1 2 3
4 5 6
7 8 9
0
POLICE FIRE
EXIT NEXT
S1 S2
S3
3
2
1
10
9
8
7
6
5
4
Table 1: Funcons of the LCD Keypad
1 - Number Pad
Used for entering PINs and system commands
2 - Arm All
Arms perimeter and interior burglary zones
3 - Disarm
Disarms the burglary portion of the system, and cancels alarms
4 - LCD Display
Displays system status, alarms, and user messages
5 - Armed Indicator
If the Armed light is on, the system has been successfully armed in
the ALL or PERIMETER mode
If the Armed light is flashing, the system has an active alarm condition
•
•
6 - Ready Indicator
If the Ready light is on, the system is ready for arming
If the Ready light is flashing, the system is not ready to be armed (a
zone is open)
•
•
7 -Trouble Indicator
If the Trouble light is on, the system has a trouble condition
8 - Function Keys
S1, S2, S3 - Selects the menu item shown on the LCD above the key
Exit - Press to exit the current menu
Next - Press to proceed to the next item
•
•
•
9 - Arm Perimeter
Arms the perimeter burglary zones (i.e. exterior doors/windows).
Interior burglary zones (i.e. motion detectors) are not armed, which
allows movement within your residence without causing an alarm.
10 - Emergency Keys
These keys are used as Police and Fire panic keys. These keys may
not be enabled in all systems (ask your installer).