User's Manual

13 ST User Manual
User Setup Mode
The user-programming mode lets you program or view the following system settings:
User PINs
Time and Date
Remote Programming Options
System Version Information
Entering User Setup Mode
To enter User Setup Mode from an LCD keypad Keypad Display
Make sure the system is disarmed. Press NEXT until the keypad
displays the following:
Select <Setup> and you will be prompted to enter a user PIN (default
PIN = 1234).
1.
2.
Program Options
Setup Prog
PIN Required:
Enter PIN
User Setup Mode Shortcut: NEXT + NEXT + NEXT + <Setup> + USER PIN
User PINs
The system allows you to program up to 24 user PINs. The PINs are identified as user
numbers 01-24.
To Add a User PIN:
Enter user setup mode (NEXT + NEXT + NEXT + <Setup> + User PIN).
The keypad will display PINS TIME DATE. Select <PINS>.
The display will show PINS TO EDIT: 01
Enter the 2-digit user number (01-24) for the user you are adding and press <Go>. For
example, to add user 09, enter 09.
Enter new PIN and press <Go>. Confirm by pressing <Go>.
To Delete a User PIN:
Enter user setup mode (NEXT + NEXT + NEXT + <Setup> + User PIN).
The keypad will display PINS TIME DATE. Select <PINS>.
The display will show PINS TO EDIT: 01
Enter the 2-digit user number (01-24) for the user you are deleting and press <Go>.
Enter 0000 and press <Go> to delete the PIN. Confirm by pressing <Go>.
•
•
•
•
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Note: After ve incorrect
PIN number entries, the
system will implement a
strike-out feature which will
ignore keypad input for 30
seconds.
Note: After ve incorrect
PIN number entries, the
system will implement a
strike-out feature which will
ignore keypad input for 30
seconds.