User's Manual

10 ST User Manual
Checking the Status
Checking the status of your system allows you to view the overall condition of your
system including the current arming level, open zones, bypassed zones, low battery con-
ditions, power failures, and other trouble conditions. For a complete list of trouble condi-
tions please refer to Table 5 in the Trouble Conditions section of this manual.
Viewing the status
Press the NEXT key. The keypad will display STAT CHIME LITE.
Select <Stat>. The keypad will display ZONE SYS MEMRY.
Select <Sys>. The system’s current status will be displayed.
Viewing open zones
If zones are open, the LCD keypad will automatically display “Not Ready to Arm” along
with a list of open zones. Open zones may also be manually viewed as follows:
Press the NEXT key. The keypad will display STAT CHIME LITE.
Select <Stat>. The keypad will display ZONE SYS MEMRY.
Select <ZONE>. The keypad will display a list of any/all open zones.
Viewing Alarm Memory
You can view alarms that have occurred during the previous arming sequence by viewing
the alarm memory.
To view alarm memory:
Press the NEXT key. The keypad will display STAT CHIME LITE.
Select <Stat>. The keypad will display ZONE SYS MEMRY.
Select <MEMRY>. The keypad will display a list of any/all alarms that occurred
during the previous arming sequence.
Viewing the Event Buffer
System events, such as alarms, are recorded in the event buffer. The event buffer displays
a list of the events that have occurred on your system.
To view the event buffer:
Press NEXT + NEXT + <Log> + User PIN + <Prev> (previous event) or <Next> (next
event).
Email Notification
The optional Ethernet Internet Module allows the system to send various system event
reports to your email address. The installer can program any email address to receive
emails for the following conditions:
Fire alarms / Intrusion alarms
Zone restorals
System troubles
Zone troubles
Arming events
Latchkey events
1.
2.
3.
1.
2.
3.
1.
2.
3.
•
•
•
•
•
•
•
Note: Existing trouble con-
ditions are always shown
automatically on the LCD
keypad display.
Note: Existing trouble con-
ditions are always shown
automatically on the LCD
keypad display.
Note: Viewing the status
also silences trouble tones
for 24 hours.
Note: Viewing the status
also silences trouble tones
for 24 hours.