User's Manual

ManualsBrandsSequel Technologies ManualsElectronicsExpander, Transceiver

Rhein Tech Laboratories, Inc. Client: Sequel Technologies, LLC

360 Herndon Parkway Model: STPF-EXT

Suite 1400 Standard: FCC 15.231

FCC ID: V4X-EXTX01 Herndon, VA 20170

http://www.rheintech.com

Report #: 2008040

Page 23 of 32

Appendix G: Manual

Please see the following pages.

Summary of content (4 pages)

PAGE 1
Rhein Tech Laboratories, Inc. 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com Appendix G: Client: Model: Standard: FCC ID: Report #: Sequel Technologies, LLC STPF-EXT FCC 15.231 V4X-EXTX01 2008040 Manual Please see the following pages.
PAGE 2
Expansion Transceiver Module (EXT) Installation Instructions Sequel Technologies, LLC General Description The Expansion Transceiver Module (EXT) adds bidirectional wireless communication between the ST Express and ST8 security systems and wireless sensors. Using unique duplex frequency diversity, the EXT transmits and receives narrow-band radio signals on two separate frequencies, providing enhanced reliability when compared to competitive systems.
PAGE 3
• A fault condition will occur when the battery is below 10 percent capacity. • A fault condition will occur if the EXT transceiver is disconnected from the keypad. • When the user presses any key on an idle keypad, it will display "please wait" while it retrieves current status information from the control panel. After 30 seconds with no key presses it will return to standby mode. Mounting the EXT in an LCD Keypad 1.
PAGE 4
Specifications • Power: 12VDC, 18 mA (provided by the control panel) • Mounting options ◦ Built-in with the ST Express ◦ Installs in a specific mounting location in the ST8 control panel ◦ Installs in an LCD keypad to convert the keypad to wireless operation (client mode) or as the master transceiver (host mode) • Transmitting frequency: 319.