User's Manual

SEQUANS Communications Confidential and Proprietary
Cat-M Module User Guide
10/25
4.3. Activate and stop DM logs
1. Before performing the test, activate DM logs by clicking on “Start” on “Sequans DM” window.
.
2. At the end of your test, stop DM logs by clicking on same button, then click on “Cancel”. DM logs
are located at “Basename” path
4.4. Power up & Power Down the UE
1. To power up the UE, type “poweron” then press Enter on “CLI for UE” window.
2. To power off the UE, type “poweroff” then press Enter on “CLI for UE” window.
Please run the command “addscanfreq 13 5230” before running any test in “CLI for UE” window