User Manual

Confidential and Proprietary SEQUANS Communications 8
2.4 Connection to Serial Port
Using a terminal emulator application (e.g PuTTY on Windows®), open the installed serial port @ 115200
bauds, 8 data bits, 1 stop bit, no parity and no flow control. Next figure illustrates a PuTTY configuration.
Note: Find the COM serial port used by the Evaluation Kit with the Windows® Devices settings, when the
installation is complete. Select the SQN31X0 device in the Windows devices list, and right-click to read its
properties. The COM port number assigned to Sequans CDC/ACM USB interface can be found on the
Hardware tab as illustrated on next figures