User Manual

Confidential and Proprietary SEQUANS Communications 10
3 General Procedures
3.1 Connect the LM63S1
For the first installation of the LM63S1 on the PC, please follow the procedure described in Section 2.
There is no other specific operation required for the later connections. Plug the LM63S1 on a USB port of
your PC and wait for the “Device ready” Windows message display. The LM63S1 is then ready.
3.2 Connection to Serial Port
Open a PuTTY terminal and use regular AT commands to control the LTE modem
3.3 Disconnect the LM63S1
Use Windows standard Eject device procedure before physically disconnect the LM63S1.
3.4 Programming Instructions
See Applications Software Development Guide.