Data Sheet

INTERFACES
POWER
12 PROPRIETARY GM02S DATASHEET (PRELIMINARY)
SEQUANS Communications
Table 2-6 shows the values of the measured leakage current (measurements
taken on silicon) for the PMU wake IOs.
Table 2-7 shows values of the external pull-up/pull-down resistor to be
used on the PMU wake IOs pads.
Table 2-8 shows details about the PMU wake IOs pulses detection mecha-
nism timings.
Table 2-6: Measured Leakage Current for the PMU Wake IOs.
Minimum Typical Maximum
3 nA 4 nA 12 nA
Table 2-7: External Pull-up/Pull-down Resistor to Be Used on the PMU Wake IOs Pads.
Minimum Typical Maximum
1 kOhm 10 kOhm 100 kOhm
Table 2-8: Details about the PMU Wake IOs Pulses Detection Mechanism Timings
Maximum Pulse Width
that Is Guaranteed to Be Ignored
Minimum Pulse Width
that Is Guaranteed to Be Seen
11.1 ns 100 µs