Data Sheet
Table Of Contents
INTERFACES
POWER
GM02S DATASHEET (PRELIMINARY) PROPRIETARY 11
SEQUANS Communications
• Behavior in Deep Sleep Mode.
Note: The PMU bi-directional wake IOs output buffer is disabled in
Deep Sleep Mode.
Figure 2-7 shows a simplified diagram of the PMU bi-directional wake IOs
in Deep Sleep Mode.
Figure 2-7: PMU Wake IOs in Deep Sleep Mode Mode
In Deep Sleep Mode, all PMU bi-directional wake IOs are high impedance
with ultra low leakage current. This corresponds to a minimum impedance
of 180 MOhm at the maximum input supply voltage of 3.6 V.
If an event is presented on the wake IO pad and this wake IO has been
configured to be sensitive on that event, this will take the system back to
Active mode.