Data Sheet

PHYSICAL CHARACTERISTICS
COMPONENT RELIABILITY
21 PROPRIETARY CB410L DATASHEET
SEQUANS Communications
2.10 Component Reliability
Notes:
1. This section does not apply to part number CB41Q85QRZ (engineering
samples).
2. Relability test results will be provided in a future edition of this document.
Table 2-9: Reliability Test Plan
Item Test conditions Standard Result
Preconditioning (a) Bake: 125°C / 24 hours
(b) MSL3: 30°C/60% RH, 192 hours
(c) Reflow 3 cycles @ Tp: 250 ±2°C for modules
JESD22-A113
TC Temperature Shock Cycling (TC)
-40°C to +85°C
Air to air, 20 minutes, ramp rate 20°C /minute,
500 cycles
JESD22-A104
THB Temperature Humidity Bias Test
+85°C, 85 % RH, Vcc Max, 168 hrs
JESD22-A101
HTS High Temperature Storage test
(+125°C, 1000hrs)
JESD22-A103
LTS LowTemperature Storage test
(-40°C, 1000hrs)
JESD22-A119
Shock Mechanical Shock (MS)
(Half Sine, 500 m/s2, 11 ms, 6 shocks (1 shock
for each ±axis)
DIN IEC 68-2-29
Drop Drop Test
1. Heigh t: 80cm,
2. concrete or steel
3. All surfaces and edges.
DIN IEC 68-2-31
ETS 300019-2-7
Vibration Vibration Test (Vib) Sweep-Sine Vibration &
Random Vibration
Sinusoidal, 10 ~ 500 Hz, 1.0 octave/min, 10
sweep cycles for 2h for each axis
DIN IEC 68-2-6
EIA/TIA 571 §4.1.1.2
Bump Bump
(Half Sine, 250m/s2, 6ms, 2 bumps/sec, 1000
bumps per ±axis)
DIN IEC 68-2-29