User's Manual

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
205375A • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • May 6, 2019 9
SKY66430-11 / SQN66430-11 SiP • Evaluation Board User Manual V1.0
6.0 Connecting the Board to a Network
If you have access to an LTE-M 4G network or simular:
Connect the RF cable or the antenna to the RF port of the board
Insert your SIM card in the SIM slot (cf Board Preparation)
To check the SIM card state,
- From the terminal, enter
AT+CFUN=1
AT+CPIN?
- Response will be
+CPIN: <code>
<code> = Ready : SIM card is present and unlocked
<code>=SIM PIN : Modem is waiting SIM PIN to be entered
<code>= SIM PUK : Modem is waiting SIM PUK to be given
or ERROR, when SIM is not inserted or not detected
From the terminal, enter AT+CEREG=1
- This command will allow getting notification every time there is a change of the network registration status
From the terminal, enter AT+CFUN=1
Response will be
- OK
- Followed by
CEREG=<stat>
<stat>=0 : Modem is not registered and is not currently searching an operator to register to
Possible cause: SIM card error or registration ongoing
<stat>=1 : Modem is registered on network -board connected-
<stat>=2 : Modem is not registered, but is currently trying to attach or is searching for an operator to register to
Possible causes:
No network available
Available networks have bad coverage
PLMN available but the registration is rejected
<stat>=3 : Registration denied
Possible causes:
Illegal mobile equipment
IMSI unknown at HLR
PLMN not allowed
Location area not allowed
Roaming not allowed in this location area
Network failure
Network congestion