User manual

34/44” MONTEZUMA/SEPHRA R4 CONVERTIBLE FOUNTAIN

FOUNTAIN ASSEMBLY

1. Before using the fountain, wash basin and other removable components with warm,

soapy water and dry thoroughly. The basin bowl should be hand washed and

not be submerged in liquid or put in a dishwasher. All other removable

components are dishwasher-safe. Do not allow water to enter the fountain base

housing through the vent holes, base screen, or other openings as this will

damage the electrical components.

2. Make sure fountain basin is secured tightly onto fountain base. Turn clockwise to

tighten; do not over-tighten.

3. Place the fountain base on a sturdy, level surface. The fountain MUST be level in

order for the chocolate to curtain properly. Rotate the adjustable leveling feet up or

down until all sides are even. Assess the level of the fountain by placing a torpedo

level on the basin rim in several different places if necessary.

4. To meet ETL Sanitation Guidelines, the included adjustable feet extensions (CF44) or

adjustable feet covers (CF34/27/23) must be assembled. Please follow the steps

below:

a. CF44

i. Turn the fountain base over so that the screen covering the internal

components of the fountain is facing up. Unscrew the 3 adjustable

feet. Screw in the enclosed non-adjustable feet extensions. Screw the

fountain feet into the non-adjustable feet extensions so that they are

secure and no screw threads are showing.

b. CF34/27/23