User's Manual

NO. : SCE-0512
Date : 01. Dec. 2005
3.3 OPERATING SUMMARY
① TRANSMITTER's button is pushed.
② TRANSMITTER sends the code by radio frequency.
③ RECEIVER gets the code and decodes it.
④ Receiver judges the code whether it is right code or not.
⑤ Receiver checks door lock or unlock state.
⑥ Receiver drives the actuator.
3.3.1 LOCK & UNLOCK
If LOCK or UNLOCK button is pushed for less than 1 sec, then
TRANSMITTER sends the LOCK or UNLOCK DATA.
3.3.2 TRUNK OPEN
If TRUNK button is pushed for more than 0.6 sec, then
TRANSMITTER sends the 'TRUNK OPEN' DATA
Page 5 of 10
Information Document
SHINCHANG ELECTRICS