User manual

Common Operations
Settings
▶
Application Tab
●
●
●
●
●
●
Auto run on Windows start-up :
allows the Connection Manager to
auto-launch when Windows starts.
Auto connect to network:
allows the Connection Manager to
auto-establish network connection
when it launches.
* Auto-Connect is independent of Auto-
Switch feature.
Auto Switching:
allows network connection to be
auto-switched between WiMAX
and HSPDA.
Prompt before auto switching
connection:
allows the Connection Manager to auto-open a dialogue box that asks if
you approve the switching to the suggested network.
* When unchecked, switching is done without notification.
WiMAX threshold (0, 1, 2, 3, 4)
determines the level of WiMAX antenna strength by which Auto-
witching condition is judged and accordingly conducted.
Ex) The WiMAX threshold value „3‟ means:
1) WiMAX HSDPA : when WiMAX signal strength found less than (＜) 3 during WiMAX connection
2) WiMAX HSDPA : when WiMAX signal strength found greater than or equal to (≥) 3 during HSDPA
connection
* The default threshold value is 0. („WiMAX threshold‟ operates, when unchecked, on the default setting.
WiMAX wake up timer (5mins, 3mins, 1min, 30secs)
determines a time interval that the Connection Manager tries to
connect to WiMAX network while HSDPA network is connected.
* The default interval is 5 minutes. („WiMAX wake up timer‟ operates, when
unchecked, on the default setting.
Ex) When set as 3 minutes, access to WiMAX network is tried for about 5 seconds
every 3 minutes.
●
Select language (E nglish, etc)
30