User manual

SEOWONINTECH Proprietary-Contents may change without notice

Conguration

PC Conguration (Windows XP)

This procedure is used to restore Windows XP’s TCP/IP setup to the default values. If

Windows has just been installed for the rst time on the PC, no changes should be required,

but you should check to conrm that all values are normal according to the following.

After completing the TCP/IP setup of the PC, connect PC and CPE with a LAN cable and

turn CPE on before Windows starts up to determine whether an IP address is obtained

from CPE automatically.

■

Click the Windows Start button, and select Settings >> Control Panel from the menu.

■

Double-click the “Network Connection” icon in the Control Panel.

Double-click the Network and Internet Connections

Double-click the Network Connection