User manual

SEOWONINTECH Proprietary-Contents may change without notice
06
Con guration
Network Con guration
To verify the normal operation of the router, check the following LEDs after connecting
the router, modem, and PC with a LAN cable, as follows:
If one or more LED lights is not in“normal operation”, take the actions speci ed in the table.
Install a router after connecting to the network.
If normal connection between router and PC is checked, you have to set up the PC and router.
PC setup is to control network con guration for Windows 98, Windows 2000, or Windows XP
to use the Internet while the PC is connected to a router.
Router setup is to connect a router to the Internet. Please refer to the CPE Setup chapter.
LED Normal Operation Actions to take if not illuminated
PWR ON when connecting adapter Check for adapter power failure
LAN1 / LAN2 ON when cable is connected normally Check for adapter power failure
PHONE
On when Phone cable is connected
normally
Check cable connection and
Telephone
WiMAX
RSSI
Represents WiMAX received signal
strength indication (RSSI), ON when in
router mode
Check that router mode is selected
Local Network
PC
WiMAX
Internet
Telephone
External NetworkGateway