User manual

This Document cannot be used without the authorization of SEOWONINTECH

■

Select “WLAN” → “WiFi Setup” from the menu.

■

Congure WiFi Basic

Select whether WiFi is enabled or disabled.

Select whether WiFi Bridge Mode is enabled or disabled.

Congure SSID of wireless AP.

Select wireless mode(11b/g mixed, 11B only, 11G only)

■

Congure WiFi Security

Select Authentication Mode(Open, Shared, WPA-PSK, WPA2-PSK)

Set whether encryption mode using WEP will be used or not.

Set network key if using WEP encryption.

■

Finish setup by clicking “Save”. Then, you will be moved to the Rebooting Screen.

■

If you have nished CPE setup and want to reboot the CPE, click “Yes” button to

reboot the CPE.

■

Changed conguration is applied after rebooting the system.

NOTE

The Wired LAN interface’s IP address can be changed according to the WiFi Bridge

mode. If you can’t access SWC-5x00W with WiFi after the modication of WiFi

Bridge mode, try to access with “192.168.2.1”.