User manual

Configuration

PC Conguration (Windows XP)

Click the Windows Start button, and select Settings >> Control Panel from the menu.

Double-click the “Network Connection” icon in the Control Panel.

This procedure is used to restore Windows XP’s TCP/IP setup to the default values. If Windows

has just been installed for the rst time on the PC, no changes should be required, but you

should check to conrm that all values are normal according to the following.

After completing the TCP/IP setup of the PC, connect PC and CPE with a LAN cable and turn

CPE on before Windows starts up to determine whether an IP address is obtained from CPE

automatically.

Double-click “Network and Internet Connections”

Double-click “Network Connections”