User manual

CPE Setup on the web page

Application (Firewall)

Firewall enables you to set the CPE so that it is not affected by external hacking attempts,

including Ping Flooding or DoS. Internal LAN PCs are usually isolated/protected from external

Internet attacks even when a rewall is not used, but it is still preferable to set the rewall to ON

as much as possible. By default, the rewall is set to ON.

Select “Application” → “Firewall” from the menu.

If you want to use the Firewall function, check the “Enable” checkbox.

Finish setup by clicking the “Apply” button. A pop-up window informing you of the result will

appear.