Datasheet

www.seoulsemicon.com
Product Data Sheet
SDWx1F1C – Chip on Board
24
Precaution for Use
(1) Storage
To avoid the moisture penetration, we recommend storing Power LEDs in a dry box with a
desiccant.
The recommended storage temperature range is 5℃ to 30℃ and a maximum humidity of 50%.
(2) Use Precaution after Opening the Packaging. Pay attention to the following:
a. Recommend conditions after opening the package
- Sealing
- Temperature : 5 ~ 40℃ Humidity : less than RH30%
b. If the package has been opened more than 4 week or the color of the desiccant changes.
(3) For manual soldering
Seoul Semiconductor recommends the soldering condition
(ZC series product is not adaptable to reflow process)
a. Use lead-free soldering
b. Soldering should be implemented using a soldering equipment at temperature lower than 350°C.
c. Before proceeding the next step, product temperature must be stabilized at room temperature.
(4) Components should not be mounted on warped (non coplanar) portion of PCB.
(5) Radioactive exposure is not considered for the products listed here in.
(6) It is dangerous to drink the liquid or inhale the gas generated by such products when chemically
disposed of.
(7) This device should not be used in any type of fluid such as water, oil, organic solvent and etc.
When washing is required, IPA (Isopropyl Alcohol) should be used.
(8) When the LEDs are in operation the maximum current should be decided after measuring the
package temperature.
(9) LEDs must be stored properly to maintain the device. If the LEDs are stored for 3 months or more
after being shipped from Seoul Semiconductor,
a sealed container with vacuum atmosphere should be used for storage.
(10) The appearance and specifications of the product may be modified for improvement without
notice.