User`s manual

16
AKR-301 Full Manual V.1.5
6. SUB MENU
To change a password, navigate to PASSWORD CHANGE in the SUB MENU and press the select button [ENT].
The following screen will appear:
6.1 PASSWORD CHANGE:
The Factory Default Password is 0000. To enter this number, press the UP/DOWN button on the remote
controller. Once you input the your current password, set a new six digit password using the numbered buttons
UP,REW,DOWN,FF
on the remote controller. Then, confirm your new password by entering the number again.
* PASSWORD ENABLE : ‘NO’
Select ‘NO” if you want to disable password to enter the OSD MENU.
6.2 MEMORY SYNC:
The index file is automatically generated and stored in the SD card when inserted into AKR-301.
If the index file
does not match the files actually stored in the SD card, users can synchronize the index file list and the actual
file list. While synchronizing, the process percentage is displayed and then its value goes back to ‘NO’ when
completed.
Y
ES
ON
30 MB
125 MB