User`s manual

17
AKR-100 Full Manual V.1.5
sensor recording starts automatically. In NORMAL-OPEN mode, if an intruder cuts the cable line that connects
the sensor to the AKR-100, the sensor recording will not start at.
5.1.3 ALARM OUTPUT (ON / OFF): Select ‘ON’ if you want to use alarm output device
5.1.4 TYPE: Select alarm output type between ‘NO’ and ‘NC’.
5.2 MOTION SETUP
5.2.1 MOTION (ON / OFF): Select ‘ON’ if you want to use motion detection.
5.2.2 SENSITIVILITY (LOW / NORMAL / HIGH): You can select the degree of sensitivity of motion detection.
The higher degree is, the more sensitively reacts AKR-100 to small movements.
5.2.3. MOTION MARK (ON / OFF): Select ‘ON’ if you want to display motion mark on the monitor.