User`s manual

AKR-100 Full Manual V.1.5

4. VIDEO QUALITY

4.1 LEVEL (HIGH / NORMAL / LOW): Select desired video level from ‘LOW’ to ‘HIGH’.

Compression Bitrate for HIGH: 1.2Mbps

Compression Bitrate for Normal: 750Kbps

Compression Bitrate for Low: 500Kbps

4.2 POST RECORDING TIME: Post recording time means the time between one event and the next one.

1 second to 30 minutes can be set up.

4.3 FRAME RATE

PAL: Selectable among 25 / 12 / 8 / 6 / 5 / 1 / 0.5 / 0.2 /0.1

NTSC: Selectable among 30 / 15 / 10 / 6 / 3 / 1 / 0.5 / 0.2 / 0.1

4.3.1 PRE RECORDING TIME

High: up to 5 seconds for pre-recording available

Normal: 750Kbps / up to 8 seconds for pre-recording available

Low: 500Kbps / up to 10 seconds for pre-recording available

4.3.2 REMAINING MEMORY: This shows remaining storage capacity for further recording.

4.3.3 REMAINING TIME: This shows remaining time for further recording.

Note 1: 1.3.1 to 1.3.4 are automatically entered when video quality is set. You cannot change the values.

Note 2: The higher the video quality, the clearer the image will be during playback.

The lower the video quality, the more space you will save on the SD Memory.

Note 3: The video quality in View Mode is not affected by the video quality setting.

These settings only affect the video quality during playback of recorded video.