Operating instructions

1Channel Video Server SVG-3110 Full Manual
38
• Generals
1) Pre Event dwell time:
When an alarm occurs, recording time before the occurrence of the alarm can be setup. (0~30
sec.)
2) Post Event dwell Time:
When an alarm occurs, recording time after the occurrence of the alarm can be setup. (0~120
sec.)
3) Alarm Duration:
The duration of the alarm can be setup (0~120 seconds)
• Sensor:
 Title : Assign the title of each event. On the occasion of a Sensor Event, a title can be
given to an alarm display window (The number of typed letters is limited up to 32)
 Sensor Type is selective:
NO (Normal Open Sensor)
NC (Normal Close Sensor)
 Send FTP : On the occasion of a Sensor Event, the user can save the video images on
the assigned FTP Server.
 Send E-Mail : On the occasion of a Sensor Event, the user can send an email to the
assigned Email Address.
 Alarm Out : On the occasion of a Sensor Event, Alarm Out function can be activated.
• Motion Detect:
 Title : On the occasion of MotionDetect, a title can be given to an email.
 Send FTP : On the occasion of MotionDetect,, the user can save the video images on
the assigned FTP Server
 Send E-Mail : On the occasion of MotionDetect, the user can send an email to the
assigned Email Address.
 Alarm Out : On the occasion of MotionDetect, Alarm Out function can be activated.
• Alarm Out:
 Follow Alarm Input : Alarm Out is operational only when Alarm Input is given.
 Always On : Alarm Out is always operational regardless of Alarm Input.
 Always Off : Alarm Out is always non-operational regardless of Alarm Input.