Operating instructions

1Channel Video Server SVG-3110 Full Manual
24
▶There are two types of installation:
1) Install SVG-3110 without an IP sharing device (Router)
: A router is not required, if a Cable Modem or Leased Line is used,
2) Install SVG-3110 with an IP sharing device (Router)
: A router is required under PPPoE environment. Also with a Leased Line or Cable Modem, the user
can use a router. The default IP of SVG-3110 is preset to 192.168.1.10 and Subnet Mask to
255.255.255.0 and Gateway to 192.168.1.1.
 Caution 1: In case of using a Router or an IP Sharing Device, only public IP (Global IP) is
used.
 Caution 2: A firewall keeps unwanted traffic from the internet away from your LAN computer.
Therefore, SVG-3110 may not work properly, if a firewall is installed in a PC and some ports of
the SVG-3110 video server are closed behind a firewall. You need to open up a port, a ‘tunnel’
through the firewall to have network connection. In this case, go to ’Setting’ ->’Control Panel’ ->
‘Firewall’ -> ‘Exception’ and then click ‘Add Port’ . Type the port name and number as it is preset
on the SVG-3110 video server.
▶The ports being used on SVG-3110 can be verified: ‘Log-in Page’ ->’Setting’->’Network Setting’
-> ‘Port’ (->see 3.2.3. Ports Setup)