Operating instructions

1Channel Video Server SVG-3110 Full Manual
23
3. Configuration of Network Environment
3.1. Check-up Network Environment and Installation Type
▶To install SVG-3110 properly, basic understanding of Network Environment is required.
1) Private line Environment
In a huge complex such as Company, University, Research center, public IP addresses are
generally used. Under this environment, the user must select a Fixed IP Address for SVG-3110
server (->see 3.2.1.-> 7 Network Type) . If DHCP server is available on the network, select
‘Dynamic IP Address’. You can get the required information (IP address, subnet mask, gateway,
DHCP server) from the network administrator.
2) Broadband (ADSL, Cable, Fiber Optic) Modem Environment
At Home, in the stores and small offices a Broadband modem (DSL, Cable Modem) or a public IP
address is usually in use. In order to use several PCs sharing one Public IP address, the user need
a specific device called Router. When installing the router, input IP address of SVG-3110
(192.168.1.10) in a DMZ. If a DMZ is not available on the router, go to ‘Port Forwarding’ or ‘NAT’
application on the router and setup the ports matching to the port setting of SVG-3110.
.