Operating instructions

1Channel Video Server SVG-3110 Full Manual

4) Supply power on the Camera and SVG-3110 ( Be sure to use Exclusive Power Adapter -④ of

[Pic.2.1])

5) Wait about 2 minutes after power is on the SVG-3110 Video Server. The light on LINK LED

shows that the system is booted successfully.

2.2. Network Setting of a PC

2.2.1. Verifying the network setup status of a user PC

•

To connect the SVG-3110 Video Server to the user PC, the network setting of the user PC

must be verified as in the following:

1) Go to ‘Start’ -> ’Settings’ -> ‘Control Panel’, then select ‘Network and Internet Connection’