User`s guide

Maintenance

Cleaning the Camera

The camera has a powder-painted stainless steel enclosure. Use a damp cloth with a

mild detergent to clean the camera enclosure.

The camera window is made from hard-coated, scratch resistant polycarbonate. To

make sure the camera window does not get scratched, use a soft, clean, damp cloth with

a mild detergent to clean the window.

Cleaning the DVR and Docking Tray

The DVR enclosure and docking tray are made from 18-gauge steel, coated with an

outdoor powder paint. Use a damp cloth with a mild detergent to clean the DVR and

docking tray. Do not let any water into the ventilation holes on the DVR enclosure or

into the termination panel of the docking tray.

Changing the DVR Ventilation Filter

Depending on the operating environment, the ventilation filter on the side of the DVR

enclosure may need to be changed occasionally. The filter should be cleaned monthly

and replaced if it restricts airflow. Failure to replace a blocked ventilation filter will

result in the DVR overheating and shutting down on a hot day.

To clean or replace the ventilation filter, use a small Phillips screwdriver to remove the

filter cover and the filter. Put a clean filter into the filter holder and replace the filter

cover and screws.