User`s guide

Operating the DVR
4–6 700-0035 R004
4.3.2. Searching for Recorded Information By Alarm List
Searching by alarm list lets you quickly identify any problems that the driver may
have indicated by pressing the Alarm Input Switch.
To search by alarm list:
1. In the Alarm Search menu, use the
CH3/Up and CH4/Down arrow buttons to
move to the desired alarm list. See Figure 4-4.
The alarm list shows the date, time, and the alarm type. See Table 4-2.
2. Turn the
JOG (inner) wheel clockwise or counter clockwise to navigate to the
previous page or next page.
3. Press the
ENTER button to start the DVR playing the selected alarm.
If the chosen alarm event was a Video Loss (V1) or Power Loss (PL), then the
DVR starts playing immediately after the video or power returned.
4. Press the
REV.PLAY button to play the video backwards to the time before the
event occurred.
5. Press the
MENU button to return to the Search menu.
[
Figure 4-3 Segment search
Table 4-2 Alarm types
Type of Alarm Description
A1 External Alarm Input
V1 Video Input is not detected (Video Loss).
VA All video signals are disconnected.
PL Power disconnected while DVR was recording (Power Loss).