User`s guide

Operating the DVR
700-0035 R004 4–3
CH3/UP
ARROW
Press the CH3/Up arrow button to:
• Display camera 3 on the monitor.
• Scroll up one line of text or move to the next field in the menu system.
CH4/DOWN
ARROW
Press the CH4/Down arrow button to:
• Display camera 4 on the monitor.
• Scroll down one line of text or move to the next field in the menu system.
MODE/ENTER Press the MODE button to change the display from quad mode (all four cameras displayed) to PIP
(picture-in -picture) mode.
• In PIP mode, press the
CH1 button to change which camera is in large image and which is the
small PIP image.
• In quad mode, press any of the camera channel buttons to see that image full screen.
ZOOM/NEXT.P • Press the ZOOM button during recording or playback to magnify the image on the screen 2×.
Use the
CH1/Left, CH2/Right, CH3/Up, CH4/Down arrow buttons to move the position of the
image on the screen.
• Press
ZOOM again to exit Zoom mode.
SEQ/DEFAULT • Press the SEQ button during recording or playback to cycle the display between quad image
mode and individual camera views. The cycle time for each view is 3 seconds.
• Press
SEQ button again to exit SEQ mode.
MENU Press the MENU button to enter and exit the main menu of the DVR.
REC Press the REC button to start the DVR recording if the DVR is not playing video or in the menus.
When the DVR is recording, the
REC button is illuminated.
REV.PLAY During playback or when the video is stopped, press the REV.PLAY button to start playing the
video in reverse.
STOP Press the STOP button to stop the DVR from recording or playing.
PLAY If the DVR is not recording, press the PLAY button to start playing the recorded video and audio.
PAUSE Press the PAUSE button to pause the video playback and provide a still frame video image.
SEARCH • Press the SEARCH button to provide a Search menu for quickly finding the desired
information.
• Exit the Search menu by pressing the
MENU button.
See “Using the Search Function” on page 4–4.
COPY Press the COPY button to provide a menu for backing up information to a CompactFlash card.
See “Using the COPY Button” on page 4–8.
DISPLAY • Press the DISPLAY button for on-screen information such as the recording speed, current time,
date, system voltage, hard drive, and recording status.
• Press the
DISPLAY button several times to choose the desired the on-screen information.
If the GPS display is turned on, the current vehicle latitude, longitude, and speed are displayed
on-screen.
Table 4-1 Using the DVR buttons
Button Description