User`s guide

Configuring the DVR
3–24 700-0035 R004
After the hard disk has been formatted, the menu goes back to the System/
Defaults menu and “
SUCCESS” will be displayed beside the Format Disk
option.
• Choose
NO to not format the disk.
3.2.7.3. Installing a Software Update
The software inside the TR4 Plus DVR can be upgraded in the field as new
features are added. The DVR reads the new software from the CompactFlash
memory card and reprograms itself.
To install a software update:
1. Insert the CF card into the slot on the on the front of the DVR.
2. Select
YES in the System Update menu.
The screen displays “
LOADING FILE...” as it reads the information from the CF
card.
The screen displays “
PROGRAMMING” as the DVR reprograms itself.
After the DVR has reprogrammed itself, the menu goes back to the System/
Defaults menu and “
SUCCESS” will be displayed beside the System Update
option.
3. Power the DVR off and restart it to finish loading the new software.
4. Load the default settings for the DVR to ensure that all of the new functions
have been completely initialized.
Important: The software update must be obtained from Seon Design. Attempting to
load other software will not work.
Figure 3-15 System Update menu