User`s guide

Configuring the DVR
3–22 700-0035 R004
3.2.7.1. Enabling the Alarm Buzzer, Alarm-in, Disk Full, and Video Loss
The DVR has a built-in alarm buzzer that can be activated under certain warning
or alarm conditions. See Figure 3-13.
To enable the alarm buzzer:
1. Set the Buzzer Enable to
ON to enable the alarm buzzer.
Buzzer Enable controls the function of Alarm-in, Disk Full, and Video Loss.
For example, if both Buzzer Enable and Alarm-in are set to
ON, the buzzer
sounds when an external alarm is received.
2. To turn the Alarm buzzer off, press any button on the DVR front panel.
To disable the alarm buzzer:
• Set the Buzzer Enable to
OFF to disable the alarm buzzer.
Alarm-in, Disk Full, and Video Loss are also disabled even though one of the
three functions may be set to
ON.
System Update See “Installing a Software Update” on page 3–24. NO, YES NO
Load Defaults See “Loading the Default Settings” on page 3–25. NO, YES Not
applicable
Format CF Card See “Formatting the CompactFlash Card” on page 3–
25.
NO, YES NO
Password See “Enabling Password Protection” on page 3–26. • ON, OFF
• default password
•
OFF
• 888888
Table 3-14 System/Defaults configuration items
Menu Item Description Values Default
Figure 3-13 Alarm Buzzer menu