User`s guide

Configuring the DVR

700-0035 R004 3–21

3.2.7. Using the System/Defaults Menu

The System/Defaults menu allows controls of system level settings and functions

that should only be accessed by authorized individuals.

To view the System/Defaults menu:

1. On the main menu, press the

CH3/Up arrow or CH4/Down arrow button to

highlight the setting you want to change.

2. Press the

ENTER button.

The System/Defaults menu appears as shown in Figure 3-12.

To change a setting on the sub-menu:

1. Press the

CH3/Up arrow or CH4/Down arrow button to highlight the setting

you want to change.

2. Press the

CH1/Left or CH2/Right arrow button to change the value. Or turn the

JOG wheel clockwise or counterclockwise to change the value.

3. To exit the menu, press the

MENU button.

4. Repeat these steps to set the Alarm Buzzer, Format Disk, System Update,

Load Defaults, Format CF Card, and Password options. See Table 3-14.

Figure 3-12

System/Defaults menu

Table 3-14

System/Defaults configuration items

Menu Item Description Values Default

Alarm Buzzer

• Alarm-in

• Disk Full

•Video Loss

See “Enabling the Alarm Buzzer, Alarm-in, Disk

Full, and Video Loss” on page 3–22.

ON, OFF OFF

Format Disk See “Formatting Disk (Hard Drive)” on page 3–23. • NO

• YES - will erase all

information.