User`s guide

Configuring the DVR
3–16 700-0035 R004
3.2.5. Using the Signals/Speed/GPS Menu
The TR4 Plus DVR has the ability to record various signals, vehicle speed, GPS,
and other information from the vehicle. For example, when the brakes are applied,
the text
BRK can be recorded on the camera picture.
To view the Signals/Speed/GPS menu:
1. On the main menu, press the
CH3/Up arrow or CH4/Down arrow button to
highlight Signals/Speed.
2. Press the
ENTER button.
The Signals/Speed menu appears as shown in Figure 3-8.
To change a setting on the sub-menu:
1. Press the
CH3/Up arrow or CH4/Down arrow button to highlight the setting
you want to change.
2. Press the
CH1/left or CH2/right arrow button to change the value. Or turn the
JOG wheel clockwise or counterclockwise to change the value.
3. To exit the menu, press the
MENU button.
4. Repeat these steps to set the five different signals. See Table 3-12.
Figure 3-8
Signals menu
Table 3-12
Signal/Speed configuration items
Menu Item Description Values Default
1: LT (Left) Active High and Active Low indicates
the activation level for the signal. If
ACTIVE HIGH is selected, then 12 VDC
applied to a signal causes the text to be
displayed on the screen.
If
ACTIVE LOW is selected, then 0 VDC
applied to a signal causes the text to be
displayed on the screen.
ACTIVE HIGH, ACTIVE LOW LT
2: STP (Stop) STP
3: BRK (Brake) BRK
4: WRN (Warning lights) WRN
5: RT (Right) RT