User`s guide

Configuring the DVR
3–10 700-0035 R004
3.2.4.1. Using the Timers Menu
Use the Timers menu to change the timer schedules to meet the requirements of
different bus routes. The menu lets you configure up to twelve different timer
schedules.
To view the Timers menu:
1. On the Record Mode/Schedule menu, press the
CH3/Up arrow or CH4/Down
arrow button to highlight Timers.
2. Press the
ENTER button.
The Timers menu appears as shown in Figure 3-6.
\
To change a setting on the sub-menu:
1. Press the
CH3/Up arrow or CH4/Down arrow button to highlight the setting
you want to change.
2. Press the
CH1/Left or CH2/Right arrow button to change the value. Or turn the
JOG wheel clockwise or counterclockwise to change the value.
3. To exit the menu, press the
MENU button.
4. Repeat these steps to set the Enable Timers, Day, Start, Stop, Speed, Quality,
and Set options. See Table 3-5.
Figure 3-6
Timers menu