User`s guide

Configuring the DVR
3–6 700-0035 R004
3.2.3. Using the Titles/Display Menu
To view the Titles/Display menu:
1. On the main menu, press the
CH3/Up arrow or CH4/Down arrow button to
highlight Titles/Display.
2. Press the
ENTER button.
The Set Titles/Display menu appears as shown in Figure 3-4.
To change a setting on the sub-menu:
1. Press the
CH3/Up arrow or CH4/Down arrow button to highlight the setting
you want to change.
2. Press the
CH1/Left or CH2/Right arrow button to change the value. Or turn the
JOG wheel clockwise or counterclockwise to change the value.
3. To exit the menu, press the
MENU button.
4. Repeat these steps to set the Main Title, Camera 1 to 4, and Display Voltage
options. See Table 3-3.
Figure 3-4 Set Titles/Display menu
Table 3-3 Set Titles/Display menu
Menu Item Description Values Default
Main Title Display a title for the system up to 28
characters.
• A to Z
•0 to 9
• ( ) . , + – / _
Not applicable
Camera 1
Camera 2
Camera 3
Camera 4
Display a title for each camera in the
system up to 12 characters.
•
A to Z
•0 to 9
• ( ) . , + – / _
1
2
3
4
Display Voltage Displays the system input voltage for
diagnosing any potential problems.
•
ON
• OFF
ON