User`s guide

Configuring the DVR
3–2 700-0035 R004
3.1. Configuring the DVR
The TR4 Plus DVR uses on-screen configuring for easy setup of all the functions
and controls. During live viewing and recording, the information displayed on the
screen can include the items shown in Figure 3-1.
Press the
DISPLAY button for on-screen information such as camera title, main title,
voltage, date, and time. If the GPS display is turned on, the vehicle latitude,
longitude, and speed are also displayed. (See “Using the Signals/Speed/GPS
Menu” on page 3–16.)
Additional information is provided in a small screen for disk size (
DISK), operating
status (
OPER), record position (R. POS) and recording speed (SPEED).
Press the
DISPLAY button several times to choose the desired on-screen
information. The default displays shows the camera title, main title, voltage, date,
and time.
Figure 3-1 On-screen display during live viewing and recording
Table 3-1 On-screen display information
Feature Description
Camera titles Identifies the cameras.
GPS information •
LAT (Latitude)
•
LONG (Longitude)
•
SPD (Speed)
Main title Identifies the system with a unique title.
Voltage Indicates the system voltage. See “Voltage Display” on
page 4–11.
Date and Time Indicates the date and time.
DISK Indicates the formatted size of the installed hard drive,
measured in GB (gigabytes).