User`s guide

Introduction
700-0035 R004 1–5
1.3.2. DVR Buttons
The DVR buttons on the front panel illuminate when the buttons are activated.
Table 1-2 provides a brief description of the DVR buttons.
For detailed information on using the DVR buttons, see “Using the DVR Buttons”
on page 4–2.
Table 1-2 Description of DVR buttons
Button Description
CH1/LEFT ARROW Pressing the CH1 button/LEFT arrow button
• Displays camera 1 on the monitor.
• Decreases the value of menu items in the menu system.
CH2/RIGHT ARROW Pressing the CH2/RIGHT arrow button
• Displays camera 2on the monitor.
• Increases the value of menu items in the menu system.
CH3/UP ARROW Pressing the CH3/UP arrow button
• Displays camera 3 on the monitor.
• Scrolls up one line of text or moves to the next field in the menu system.
CH4/DOWN ARROW Pressing the CH4/DOWN arrow button
• Displays camera 4 on the monitor.
• Scrolls down one line of text or moves to the next field in the menu system.
MODE/ENTER Pressing the MODE button changes the display from quad mode (all four cameras displayed)
to PIP (picture-in -picture) mode.
• In PIP mode, press the
CH1 button to change which camera is in large image and which is
the small PIP image.
• In quad mode, press any of the camera channel buttons to see that image full screen.
ZOOM/NEXT.P • Pressing the ZOOM button during recording or playback magnifies the image on the screen
2×. Use the
CH1/LEFT, CH2/RIGHT, CH3/UP, and CH4/DOWN buttons to move the position of
the image on the screen.
• Press
ZOOM again to exit Zoom mode.
SEQ/DEFAULT • Pressing the SEQ button during recording or playback cycles the display between quad
image mode and individual camera views. The cycle time for each view is 3 seconds.
• Press
SEQ button again to exit SEQ mode.
MENU Pressing the MENU button enters and exits the main menu of the DVR.
REC Pressing the REC button starts the DVR recording if the DVR is not playing video or in the
menus. When the DVR is recording, the
REC button is illuminated.
REV.PLAY During playback or when the video is stopped, pressing the REV.PLAY button starts playing
the video in reverse.
STOP Pressing the STOP button stops the DVR from recording or playing.
PLAY If the DVR is not recording, pressing the PLAY button starts playing the recorded video and
audio.
PAUSE Pressing the PAUSE button pauses the video playback and provides a still frame video image.