User`s guide

The Trooper™ Basic Installation and User’s Guide 3
2. Vertical Installation
For added versatility and installation in difficult locations, The Trooper™ System
can be mounted vertically. The enclosure has three mounting holes in the back to
accommodate this.
a. Remove the door and lid from the enclosure, and then slide the DVR out.
b. If necessary, swap the Cable Grommet and the Hole Plug to accommodate
the cable entry.
c. Use 3 of the enclosed #10 x ¾” screws or #10 x 1” self-drilling screws to
attach the enclosure to the floor.
d. To prevent excess vibration, use the remaining #10 x ¾” screw or #10 x 1”
self-drilling screw to attach the enclosure to a vertical surface.
e. Re-attach the enclosure lid using the 2 screws removed earlier.
Vertical Mounting Screw