User`s guide

The Trooper™ Basic Installation and User’s Guide 19
4.6 Password
The Trooper™ TR4-10 DVR can implement password protection that will
disable the use of the front panel buttons.
To enable the password
protection, change the
Password Enable option to ‘ON’.
The default password is
‘888888’. This can be easily
changed using the ‘JOG’ wheel.
The password characters can be
the numbers 0 through 9,
uppercase letters, and some
punctuation.
When PASSWORD ENABLE is ‘ON’, the user cannot stop the recording or
enter the menus unless the Password is entered. When entering the
Password, use the center JOG Wheel to change the password character and
use the ‘LEFT’ and ‘RIGHT’ buttons to move between characters.
PASSWORD
PASSWORD ENABLE: OFF
PASSWORD : 888888