User`s guide

The Trooper™ Basic Installation and User’s Guide 18

The DVR must shut down and restart to load the new software. Finally, it is

best to load the default settings for the DVR to ensure all of the new functions

have been completely initialized. Please see Section 4.4 below for information

on loading the system defaults.

4.4 Load Defaults

The default values for all of the DVR options can be loaded at once using the

Load Defaults option.

To load the system defaults,

choose ‘YES’ from the menu.

Note that this will erase all of the

user-programmed settings

including the Title, the Delay-On

and Delay-Off Times, and the

Timer settings.

The message ‘LOADING….’ will be displayed as the system loads the new

default values. After the defaults have been successfully loaded, the display

will return to the System/Defaults menu and display ‘SUCCESS’ beside the

Load Defaults option.

4.5 Format CF Card

To save information from the DVR onto a CF Card, the card must first be

formatted using the DVR’s proprietary file system.

Choose the ‘YES’ option to

format the CF Card to the

proprietary file system.

Please refer to the CF Card Conversion Software Manual for more

information.

LOAD DEFAULTS

YES

FORMAT CF CARD

YES – WILL ERASE ALL

INFORMATION