User`s guide

The Trooper™ Basic Installation and User’s Guide 16
4. System/Defaults
The System/Defaults menu of The Trooper™ TR4-10 DVR allows control of
several functions that should only be accessed by authorized individuals. One of
the key elements in this menu is the Password option that can protect against
unauthorized access. Please see Section 4.6 below for more information.
\
The System Defaults menu is
shown at the left. Use the ‘UP’ ‘and
‘DOWN’ arrows keys to move
between the menu items.
Press the ‘ENTER’ button to select
an item.
4.1 Alarm Buzzer
The DVR has a built-in buzzer that can be activated under certain warning or
alarm conditions.
The Buzzer Enable option
controls the function of the
three options below. Turn this
option ‘ON’ to enable the
buzzer.
The Alarm-In option will sound
the buzzer if an external Alarm
Input is initiated; the buzzer will
sound for the duration of the
alarm. To turn off the Alarm
buzzer, press any button on the
front of the DVR.
Please see Section 3.8 above for more information on the Alarm Recording
feature.
The Disk Full option will sound the buzzer if the Repeat Record option is
‘OFF’ and the hard-drive has been filled with information.
The Video Loss option will sound an alarm if the video input to the DVR is not
present. Possible causes of this include a broken cable, a connecter
unplugged, or, very rarely, a damaged camera. Note that the buzzer will not
turn off unless the video signal is restored, or the buzzer is disabled in the
menu.
SYSTEM DEFAULTS
ALARM BUZZER
FORMAT DISK
SYSTEM UPDATE
LOAD DEFAULTS
FORMAT CF CARD
PASSWORD
ALARM BUZZER
BUZZER ENABLE: OFF
ALARM-IN : OFF
DISK FULL : OFF
VIDEO LOSS : OFF